Order Hotline 0845 370 3103
Email sales@avpartsmaster.co.uk

A Projector Lamp

When you want to get a projector lamp you should remember that although the price isn't very cheap, it will run you around 100 pounds to 300 pounds. However, you should also keep in mind that these projector lamps will normally last around 2000 hours. That's a lot of time if you are using the projector at home. So really, a projector lamp isn't too expensive if you look at it this way.

The reasons why this projector lamp is pretty expensive is that there aren't a lot of them produced by the manufacturers. This is because of the time that it will last. With a family, they may need to replace this projector lamp about every two years. Of course they do produce them, because businesses will go through projector lamps a lot quicker than every two years.

Another reason that the price is up there is that only the manufacturers produce the projector lamp. If a third party vendor could come in and make these, the price would no doubt go down a bit. However, the manufacturer really doesn't make much money after you have bought the projector until you go to buy a projector lamp. Plus you might be interested to know that a projector lamp costs the manufacturer around 70 pounds to make. Nice profit if the price is 300 pounds for you.

If you want a projector lamp to last longer, you should make sure that you use the low mode to operate the projector. This will cut down on the use of the projector lamp; some manufacturers claim that using the low mode instead of the high mode will actually add up to another 1000 hours. That's a pretty big amount of time that you can add to that projector lamp, which means a longer time before you need to buy a new one.

If you are setting up your projector, you need to make sure that it is placed at least 6 inches from a wall. If you put it too close to a wall you will find that the lamp will not work right and the projector lamp will not be cooled down like it should be. You should also make sure that when you stop using your projector you wait around a minute or two to shut it off completely. This will give the projector lamp time to cool down properly, which also will help in adding more time to the life of the projector lamp.

Your projector has filters in it that need to be cleaned and replaced around every 100 hours that you use the projector. If you keep up with this cleaning and replacing manufacturers claim it will add another 20% more life to your projector lamp.

As you can tell, if you follow these steps with your projector the life of your projector lamp can indeed be increased by quite a bit of money. With the price of a projector lamp you need to take advantage of any way that you can to add more lifetime to the projector lamp.

Your IP Address is: 92.233.77.223